Skip to main content
Every Axol release has an offline bundle for Host Computers that have no internet access. Download the bundle on any computer, then install it from the control panel. The install doesn’t use the network.
The offline bundle updates an existing install. The Host Computer needs the one-command install once, with internet access.

Download the bundle

  1. On a computer with internet access, open the Axol releases page.
  2. Under Assets for the release you want, download axol-offline-v<version>-linux-aarch64.tar. It is about 800 MB.
The linux-aarch64 bundle is for the Jetson Host Computers that Axol supports. Don’t extract it.

Install from the control panel

  1. Bring the bundle to a computer on the robot’s network, for example on a USB drive.
  2. Open the control panel at https://<host-ip>:8001 and go to the Host Computer card.
  3. On the Offline update line, press Install from file, then Choose file, and pick the .tar file.
  4. Wait for the upload. If the connection drops, choose the same file again to continue where it stopped.
  5. The Host Computer checks the file. It installs only bundles signed by Almond, for this computer’s platform.
  6. Stop any running operation, then press Install update.
The banner at the top shows each step of the install. The Host Computer restarts when it finishes, and the panel reloads. The control panel’s usual update banner checks GitHub for releases, so it doesn’t appear on a Host Computer without internet access. Install each release from its bundle instead. To go back to an older release, upload its bundle. The panel says the version is older than the installed one. Press Use older version to install it anyway.

Install over SSH

Use this the first time, when the Host Computer runs a release without Install from file. You can also use it instead of the control panel.
  1. Copy the bundle to the Host Computer:
  2. On the Host Computer, extract the bundle and run its installer:
The installer checks every file, installs the release and its software from the bundle, then restarts the axol service. You can delete the .tar file and the extracted folder afterwards.

If the install stops

The bundle doesn’t include the ZED SDK or Ubuntu packages. The install uses the copies already on the Host Computer. If an optional step needs something that isn’t there, the install finishes with a warning that names the step. Axol works without it.